Perfecta

i buy Adventurer 5M and Nozzle 0.6mm but receive only Adventurer 5M :(((

I really like this printer, it's really fast, the quality is impressive.
It's running everyday all day and the print failure ratio is close to 0.
I also printed the DIY enclosure and now printing ABS is as easy as printing PLA.
Excellent pinter, nothing else to say !

The Adventurer 5M is my first 3D printer and I've just started collecting my experience in 3D printing area with it.

So far everything is good except one minor thing I faced during the first initialization of the device. After table leveling and printing head calibration were finished, I was asked if I'd like to print a test 3D model (small rectangular brick). I selected this option, the printer warmed up the table and nozzle, but printing didn't start and the printing head was sitting in the corner without any action. I waited around 5 minutes, interrupted the printing process, and restarted the printer. I googled for that and it seems like the firmware didn't have a file for this model and therefore the printer just stuck after heating up. I upgraded firmware manually, afterwards I could see the test brick model appeared in the printing list. Although I could overcome the problem myself and it doesn't affect functionality, such things affect first impression of a customer.

One additional hardware related point was identified during unboxing and visual checkup of the device. Two screws holding one of the XY motors used for adjusting belt tension were overtightened so that the plastic motor holder was damaged a bit where screw heads went into the plastic body. So far everything works as is and I don't see a need for adjusting belt tension, but it can become an issue once I'd need to do this procedure. If you're interested, I can send you detailed pictures.

Despite the aforementioned issues, I'm really happy with the Adventurer 5M printer and looking forward to many prints without any malfunctions.

Perfect